NcSTAR Laser Cut Plate Carrier CVLCPC3050G Medium-2XL Green
MPN CVLCPC3050G. 1x NcSTAR Laser Cut Plate Carrier (CVLCPC3050G). MOLLE Laser cut MOLLE slots for a low-profile look. Plate Compatibility Fits 10×12 in hard plates. Color Green.
MPN CVLCPC3050G. 1x NcSTAR Laser Cut Plate Carrier (CVLCPC3050G). MOLLE Laser cut MOLLE slots for a low-profile look. Plate Compatibility Fits 10×12 in hard plates. Color Green.
NcSTAR, Laser Cut Plate Carrier, Black, Size 2XL+ Laser Cut MOLLE Slots, Kangaroo Pouch, Fits 11″x14″ Hard Plates CVLCPCL3051B Description: Designed with precision in mind, the NcStar Laser Cut Plate Carrier is an essential part of any mission-ready loadout. Featuring a kangaroo pouch with removable triple pouch insert that can hold 2 magazines and 1 tourniquet (not included), you can be ready for whatever comes your way. Fitting 11″ x 14″ hard plates, the padded shoulder straps help reduce fatigue and provide comfort while wearing the carrier. Kangaroo pouch with removable triple pouch can hold 2 mags and 1 tourniquet (NOT INCLUDED) Laser cut molle slots for a sleek low profile look. Low profile drag handle Soft side hook and loop on both front and rear panels for patches and/or name tapes Padded shoulder straps Fits 11″ x 14″ plates Dimensions : 14.5”L X 11.5”W X 3”D Color: Black .
Heavy duty tactical drag handle. Made for rapid donning and doffing. Reinforced cross stitching. Sizing One size fits most. Plastic quick connect buckles. ID Patch Areas 10″ Wide 4″ High panels on chest and back.
Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a light weight ballistic plate Rated at Level III Plus – capable of stopping 7.62x51mm Curved 6″ X 6″ Square Cut for side coverage. Single curve to better conform to the side of the body for more comfort. Can be used for the side pockets of some plate carriers with 6″ X 6″ side pockets. Ideal for use in some VISM Plate Carriers with 6″ X 6″ side panel pockets. Weight: 17.1 oz. (Curved 6”X6” Square Cut) Fully sealed to protect against liquids, chemicals, and other harsh elements Assembled in the U.S.A.
One suggestion is to paint for easier handling & to extend the life. DON’T RUB HANDS ON PLATE UNTIL YOU SPRAY PAINT! BETTER THAN STEEL: -LESS WEIGHT-NO SPALL BETTER THAN KEVLAR/ARAMID/PE: -STAB PROOF-LAST LONGER-ABSORBS MORE OF THE IMPACT Included in this listing:VestSIZE: Adjustable Medium to XXLExpert Heavy Duty Plate Carrier designed to fit larger front & back armor plates up to 11″ X 14″ in size. MOLLE webbing for the ultimate in custom configuration.MOLLE webbing on the front, back, and side panels allows the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear.Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51″L. Side pockets will allow for 6″ X 8″ side armor panels/plates. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit.Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing.Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10″X 6″ front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor.Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areasPlates(2) High Quality FLAT ArmorCore Plates (10×12) Rated Level IIIA “plus”The plus designates that the plates are stab proof and last 60+ yearsTested with multiple rounds including .44 Mag @ 10 yards (Zero Penetration)Plate edges are smooth and free from burrs or sharp edgesThe plates are cut for an ambidextrous comfortable fitEach 10×12 plate weighs 3lbs 14oz and is a 1/2 inch thick (HALF THE WEIGHT OF STEEL)** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor ** 15% restocking on all returns_________________________________________________________________Legal Notice It is important to remember that nothing is “bulletproof” and that there are many variables at play which allow any type of armor to stop a given object. There will always be danger in these types of situations. We will only sell armor to law-abiding adults who have no felony convictions, and are not involved with criminal organizations. Residents of Connecticut are prohibited from buying Body Armor. We will only ship to states where Body Armor is allowed, please know your local and federal laws prior to purchasing. By purchasing, you agree to this and all terms listed on this page, and Body Armor Megastore By purchasing you assume all risks of use or misuse, and agree not to hold us liable in any way. In addition, YOU are responsible to ensure that your ballistic panels are properly inserted and installed. Body Armor Megastore and any of its affiliates assume NO liability.We neither assume, nor authorize any person to assume for us any liability in connection with the sale or use of the goods sold, and there are no oral agreements or warranties collateral to or affecting this agreement. We hereby give notice that any statement made by us in the sale of the goods, shall not create any warranty that the goods shall be fit for any particular purpose. Statements, images or descriptions are informational only, and not made or given as a warranty of the goods in any way. We specifically disavow any other representation, warranty, or liability related to the condition or use of the goods.We do not cover any consequential damages, and our liability is limited to repairing or replacing defective goods. This product is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. We are not an insurer, and bear no liability for any use, misuse, or failure to perform. All warranties including the implied warranties of fitness and merchantability. Incidental and/or consequential damages are excluded. Purchaser covenants and agrees that the purchaser or his/her heirs, agents, assigns shall NEVER bring any action in any court of law from any dispute arising from the Purchase and Sale of product(s) sold by Body Armor Megastore or any of its affiliates. If any part of these terms is held to be invalid by a court of competent jurisdiction, such shall not affect the validity of any other part of these terms. Headings are for convenience only, and do not limit or affect these Terms. These terms may be updated without prior notice.In accordance with Marketplace Fairness Act & Remote Transactions Parity Act ALL Customers are liable for all Federal, State and Local Taxes due. We will collect and handle sales tax for customers from our home state of PA.
***Note: Listing is for a single plate/panel NOT a set*** LVL III+ SRT Ceramic/PE Ballistic Plate – 10″X12″ – STR’s Cut NEW Level III+ SRT SiC Ceramic/PE Composite Plate (BP3PC1012) 10”X12” Shooter’s CutSpecial Rifle Threat (SRT) is designed to defeat Level III+ threats from high velocity rifle rounds from the most commonly used rifle threats in use.Ballistic plate is constructed of a Sic Ceramic/UHMWPE composite resulting in a lighter plateMaterial structure allows for a greater crack resistance over other ceramic plate designsCurved design fits the user with greater comfort, and the cut upper corners allow for better mobilityFully sealed to protect against liquids, chemicals, and other harsh elementsIdeal for use in VISM Plate CarriersDimensions: 10” X 12” X 0.8”Weight: 4.6 lbs.Assembled in the U.S.A.LVL IIIA PE Soft Ballistic Plate – “8×10″-10″x12”-“11×14” STR/RCT Cut- NEWConstructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a light weight ballistic panelRated at level IIIA – capable of stopping 9mm and .44 Mag rounds up to 1,400 FPSFlexible design allows the panel to conform to various shapes – ideal for use in body armor carriers, backpacks, laptop cases, and luggage.Fully sealed to protect against liquids, chemicals, and other harsh elementsIdeal for use in VISM Plate CarriersAvailable in 8”X10”, 10”X12”, and 11”x14” sizesAvailable with STR’s Cut or Rectangle CutWeight: 0.75 lbs. (8”x10” Rectangle cut)Weight: 0.95 lbs. (10”x12” STR’s cut)Weight: 1.1 lbs. (10”x12” Rectangle cut)Weight: 1.31 lbs. (11”x14” STR’s cut)Weight: 1.37 lbs. (11”x14” Rectangle cut)Made in the U.S.A. LVL IIIA PE Soft Side Panels “6×6″Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a light weight ballistic panelRated at level IIIA – capable of stopping 9mm and .44 Mag rounds up to 1,400 FPSFlexible design allows the panel to conform to various shapes – ideal for use in body armor carriers side panel coverage.Fully sealed to protect against liquids, chemicals, and other harsh elementsIdeal for use in VISM Plate CarriersAvailable 6”X6” sizesWeight: 5.1ozMade in the U.S.A.
Protect your upper torso with the NcSTAR PE Ballistic Plate! This plate in particular is designed to stop and is capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds. Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a light weight ballistic plate.
NcSTAR VISM is a manufacturer of high quality tactical accessories. They have been manufacturing high quality products since 1997. They are dedicated to providing customers with top of the line pouches, optics, and tactical equipment for the most affordable price out there. The NcSTAR Helmet Bag is designed to conveniently help you carry your helmet when it is not in use. The bag is composed of a high quality, highly durable nylon material for longevity. The bag features a shoulder strap and hand straps to give you various ways of holding it. The MOLLE webbing on the exterior of the bag allows for attachment of various pouches and accessories. Item Condition – Brand New in packaging Manufacture: NcSTAR Colors: Black, OD Green, Tan Size: 12″H x 14″W x 9″D Weight: 1 lb Features:- Holds most standard sized tactical helmets- High density padding to protect your helmet while stored- MOLLE webbing attached to exterior of bag- Carry straps and shoulder strap for convenient carry- Heavy duty zipper and zipper pulls
NcSTAR VISM is a manufacturer of high quality tactical accessories. They have been manufacturing high quality products since 1997. They are dedicated to providing customers with top of the line pouches, optics, and tactical equipment for the most affordable price out there. The NcSTAR Helmet Bag is designed to conveniently help you carry your helmet when it is not in use. The bag is composed of a high quality, highly durable nylon material for longevity. The bag features a shoulder strap and hand straps to give you various ways of holding it. The MOLLE straps gives you the freedom to attach this bag to a MOLLE surface like another backpack, range bag, or more. Item Condition – Brand New in packaging Manufacture: NcSTAR Colors: Black, OD Green, TanSize: 10.75″L x 10″W x 6″D Weight: 12 oz Features:- Holds most standard sized tactical helmets- High density padding to protect your helmet while stored- MOLLE straps for attachment to other bags/packs- Carry straps and shoulder strap for convenient carry- Heavy duty zipper and zipper pulls
Combo includes: BSC1012 + BSF1012 + BGBPS3003B/BGBPS3003LG/BGBPS3003NThe GuardianPack™ backpack’s quick deployable front carrier includes a 10″ X 12″ Level IIIA Corner cut soft ballistic panel. The front carrier is housed within a dedicated body armor compartment in the backpack with a magnetically sealed flap until needed. The wearer deploys the front panel by pulling the two shoulder straps over the wearer’s head. The front carrier straps can then be buckled around the waist.The front carrier can be adjusted for height for the proper coverage of the front torso. The front carrier can also be detached from the GuardianPack™ backpack, with top straps that can be buckled together and placed over the head and neck to wear individually and separate from the backpack.The rear carrier is stationary inside the backpack close to the wearer’s back. It contains a 10″ X 12″ rectangular cut Level IIIA soft ballistic panel.The main backpack compartment dimensions are 17”H X 12”W X 4D” and the outside zippered pocket is 10”H X 10”W X 1.2”D. Two zippered outside pockets 6.75”H X 9”W, 10”H X 10”W, and two mesh side pockets for water bottles.US Patent 10130160.