• 1 – 10×12 AR500 flat Rifle back plate. If you knowingly buy Semper Fi Armor – AR500 Body Armor Plates as a convicted felon, you could end up in jail for your actions. Semper Fi Armor LLC is not responsible for any liability you may incur by purchasing, possessing and the use of Semper Fi Armor – AR500 Body Armor Plates or item(s).
Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Multi-Curved Body Armor Plates • Plate Sizes: 11″ x 14″ • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.
Down Range Industriesspecializes in making AR500 Body Armor and AR500 Steel Targets. We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability.
Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability.Introducing our new Down Range Industries Ergo-Lite™ 2.0 Plate! This body armor plate features an even better ergonomic design than our previous Ergo-Lite™ Plate. The bend towards the top of the plate sits perfectly on your chest to make the plate feel even lighter than it is! The two ergonomic bends on the side wrap around the torso to give a nice snug fit. Weighing in at just over 7lbs, this armor plate will keep you protected while also feeling comfortable all day long! Description: • PAIR of (2) AR500 Multi-Curved Ergo-Lite™ 2.0 Body Armor Plates • Plate Sizes: 10″ x 12″ • Plate Weight: 7.1 lbs each • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.
Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Multi-Curved Body Armor Plates • Plate Sizes: 6″ x 8″ Side Plates • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.
Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Multi-Curved Body Armor Plates• Plate Size: 10″ x 12″• Each plate weighs approximately 8.4 lbs• Curved to accommodate natural angle of body.• Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture)• Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results)• Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.
Down Range Industriesspecializes in making AR500 Body Armor and AR500 Steel Targets. We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability.
American made, all day everyday! Already made, in stock and will ship immediately. No wait time. 2 day FedEx Air. You click we ship. FREE TRAUMA PADS2 – 10×12 Front and Back – 10mm Trauma PadsManufactured from XP-30 – 2 Stage Crosslinked Polyethylene Exemplary FoamUltra Light Weight – Less then 4 Ounces • A Set of 2 – 10×12 AR500 Curved Chest Plates. One front plate and one back plate! TWO PLATES Introducing the SFA Spec Fit. This is an ergonomic and comfortable design that won’t inhibit your movement. Specifications: • 1/4 inch LEVEL III Body Armor• These plates are Stand Alone plates, meaning that the steel plate itself qualifies as Class III Armor. Rhino is added in addition to the plates to enhance their capabilities.• Think of the Rhino as the ultimate way to protect your armor investment and to have it maintain a rugged professional appearance for a life time.• The plates are Die Set Pressed to provide a smooth uninterrupted radius that does not compromise the integrity of the steel. The plates are NOT press braked. H.P. White Laboratory, Inc. – Tested and Certified: • This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.• NIJ tested Level III Armor will defeat 6 rifle rounds up to 7.62×51/.308 @ 2780 ft/s @ 15 METERS Our armor plates are coated with an industry leading protective material. This protection offers the best of both worlds. Not only does it offer superior impact resistance which is able to withstand the roughest of conditions but additionally it provides high levels of corrosion and chemical resistance. Our armor plates are professionally coated using an industrial grade system that applies the Rhino™ at over 150 degrees in temperature. The coating combined with a surface that was prepared by using an industrial shot blaster provides a superior finish you can trust. Rhino: • High impact and abrasion resistance• Reinforced corrosion resistance• Substantial chemical resistance• Flexible and unyielding bond Military Applications: • Tank Lining• MRAP Vehicles• Secondary containment• Blast Mitigation SEMPER FI ARMOR WHO WE ARE… Our company is owned and operated by Combat Marines. Our mission is to bring integrity and excellence to you through the best made personal protection and tactical supplies on the market. We only sell items we use ourselves trust and there are no compromises. MARINES KEEP IT SIMPLE… AND EFFECTIVE. Semper Fi Armor plates are prepared for a coating with a large scale shot blasting machine. This process is more expensive and provides a remarkable bonding surface. Our armor plates are pressed in a precisely designed die-set which yields an undivided radius in the plate that is uninterrupted and preserves the integrity of the steel. Attention to detail is everything. Thank you for your business. “PREPARE TO BE UNSTOPPABLE” Semper Fi Armor Legal Terms and Conditions: Before purchasing any Semper Fi Armor – AR500 Body Armor Plates make sure you know what laws apply to body armor in your specific locality. If you are caught purchasing or utilizing Semper Fi Armor – AR500 Body Armor Plates in a locality where it is prohibited, you might be subjected to legal action. You are taking ultimate responsibility for your purchase and ensuring you are following all laws and regulations for your jurisdiction. You must be 18 years of age to purchase Semper Fi Armor – AR500 Body Armor Plates. If you are a convicted felon and are caught wearing Semper Fi Armor – AR500 Body Armor Plates, you will be subjected to legal ramifications. If you knowingly buy Semper Fi Armor – AR500 Body Armor Plates as a convicted felon, you could end up in jail for your actions. Don’t commit a crime while wearing Semper Fi Armor – AR500 Body Armor Plates. Residents of Connecticut are prohibited from buying Semper Fi Armor – AR500 Body Armor Plates unless the sale is face to face (or unless the buyer is a police officer, Police Department, or military). We can’t ship to Connecticut, or even accept credit cards billed there… We cannot ship to residents of Connecticut who are not police or military. Semper Fi Armor – AR500 Body Armor Plates are not 100% bulletproof. If you are shot with Semper Fi Armor – AR500 Body Armor Plates on, significant injuries could still occur. Being shot at is always a life threatening situation. By purchasing Semper Fi Armor – AR500 Body Armor Plates from Semper Fi Armor LLC you agree to completely release, never bring any action in court and hold harmless Semper Fi Armor LLC. Semper Fi Armor LLC is not responsible for any liability you may incur by purchasing, possessing and the use of Semper Fi Armor – AR500 Body Armor Plates or item(s). These Terms & Conditions may be updated, revised, or changed without prior notice.
Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Level III Multi-Curved Body Armor Plates • Plate Sizes: 6″ x 6″ Side Plates • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.
Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Level III Multi-Curved Body Armor Plates • Plate Sizes: 10″ x 12″ • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. • Includes Lightweight Plate Carrier with Triple Mag Pouch ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.