Body Armor AR500 Level 3 Set Of Plates Curved 10×12
23 Jul 2026

Body Armor AR500 Level 3 Set Of Plates Curved 10×12

by | | 0

Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Level III Multi-Curved Body Armor Plates• Plate Size: 10″ x 12″• Each plate weighs approximately 8.4 lbs• Curved to accommodate natural angle of body.• Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture)• Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results)• Ability to be used in front and/or back.• Spall mitigation options are available for an additional charge on our website!• Free XP-40 Trauma Pads Included! ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.

BALLISTIC SHIELD | Bullet Proof | Body Armor Level III++ L3++ 12×23 STOPS 30-06
23 Jul 2026

BALLISTIC SHIELD | Bullet Proof | Body Armor Level III++ L3++ 12×23 STOPS 30-06

by | | 0

IMPORTANT PLEASE READ->NOT PAINTED<-*Patent pending*(RATED LEVEL III++)BETTER THAN AR500 STEEL PLATES & L3+WORK REQUIRED BY YOU: (VERY SIMPLE)**SPRAY PAINT**ASSEMBLE THE PLATE W/ THE HANDLE AND GLUE THE FOAM TO THE PLATE IMPORTANT:The fiberglass edges can fray or chip when shipping which is unpreventable. The damage is likely only cosmetic and doesn't diminish the stopping power. A suggestion is to seal the edges with duct tape or a truck bedliner. ArmorCore has no expiration date. As long as it is not exposed directly to U/V rays, chemicals, etc. it should not break down. When used in construction projects, they say it should last the life of the building (60+yrs)Level III+ stops the majority of ALL ROUNDS you will encounter including .556NO STRAP INCLUDEDIncluded in this listing:• (1) High Quality FLAT ArmorCore Plate Rated Level III++• Includes handle, screws, foam pad• Tested with multiple rounds including 30-06/.556/.308 (Zero Penetration)• Plate edges are rounded• Size: 12×23 inches• Weighs 24+ lbs** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor **15% restocking on all returns_________________________________________________________________Legal NoticeIt is important to remember that nothing is "bulletproof" and that there are many variables at play which allow any type of armor to stop a given object. There will always be danger in these types of situations.We will only sell armor to law-abiding adults who have no felony convictions, and are not involved with criminal organizations. Residents of Connecticut are prohibited from buying Body Armor. We will only ship to states where Body Armor is allowed, please know your local and federal laws prior to purchasing. By purchasing, you agree to this and all terms listed on this page, and Body Armor MegastoreBy purchasing you assume all risks of use or misuse, and agree not to hold us liable in any way. In addition, YOU are responsible to ensure that your ballistic panels are properly inserted and installed.Body Armor Megastore and any of its affiliates assume NO liability.We neither assume, nor authorize any person to assume for us any liability in connection with the sale or use of the goods sold, and there are no oral agreements or warranties collateral to or affecting this agreement. We hereby give notice that any statement made by us in the sale of the goods, shall not create any warranty that the goods shall be fit for any particular purpose. Statements, images or descriptions are informational only, and not made or given as a warranty of the goods in any way. We specifically disavow any other representation, warranty, or liability related to the condition or use of the goods.We do not cover any consequential damages, and our liability is limited to repairing or replacing defective goods. This product is sold "AS IS" and "WITH ALL FAULTS". The entire risk as to the quality and performance of the product is with the buyer. We are not an insurer, and bear no liability for any use, misuse, or failure to perform. All warranties including the implied warranties of fitness and merchantability. Incidental and/or consequential damages are excluded. Purchaser covenants and agrees that the purchaser or his/her heirs, agents, assigns shall NEVER bring any action in any court of law from any dispute arising from the Purchase and Sale of product(s) sold by Body Armor Megastore or any of its affiliates. If any part of these terms is held to be invalid by a court of competent jurisdiction, such shall not affect the validity of any other part of these terms. Headings are for convenience only, and do not limit or affect these Terms. These terms may be updated without prior notice.In accordance with Marketplace Fairness Act & Remote Transactions Parity Act ALL Customers are liable for all Federal, State and Local Taxes due. We will collect and handle sales tax for customers from our home state of PA. CONSUMERS SHOULD SUPPORT – H.R. 6824

4 Pc Level III AR550 Body Armor Plates Molle Vest Set-up
23 Jul 2026

4 Pc Level III AR550 Body Armor Plates Molle Vest Set-up

by | | 0

Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description:• Curved to accommodate natural angle of body.• Front & Back Plate Size: 10″ x 12″• Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture)• Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results)• Ability to be used in front and/or back.• Includes either 6″ x 6″ side plates or 6″ x 8″ side plates (choose your specific size in the drop down menu) • Fully adjustable (Medium – 2XL) Molle Vest Included. Fits 10 x 12 front and back plates as well as up to 6 x 8 side plates. Choose color in the drop down menu! ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights: 10×12 Swimmer – 7.7 lbs/ea10x12 SAPI – 8.4 lbs/ea 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.

AR500 Level 3 III Body Armor Plates Pair – Curved 8×10 Swim/Sapi
23 Jul 2026

AR500 Level 3 III Body Armor Plates Pair – Curved 8×10 Swim/Sapi

by | | 0

Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Level III Multi-Curved Body Armor Plates • Plate Sizes: 8″ x 10″ • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.

AR500 Level 3 III Body Armor Plates – Curved 10×12 w/ 6×6 Side Plates Swim/Sapi
23 Jul 2026

AR500 Level 3 III Body Armor Plates – Curved 10×12 w/ 6×6 Side Plates Swim/Sapi

by | | 0

Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Level III Multi-Curved Body Armor Plates – 1 Advanced Swimmer Cut & 1 Standard SAPI Cut • Plate Sizes: 10″ x 12″ w/ 6″ x 6″ Side Plates • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.

5×7 Side Plates (set of 2) Ballistic Made Of AR500 Steel— LVLIII
23 Jul 2026

5×7 Side Plates (set of 2) Ballistic Made Of AR500 Steel— LVLIII

by | | 0

WE ARE FULLY STOCKED AND WILL SHIP PRODUCT NEXT DAYIncluded:Two 5×7 Side PlatesDetails:Level III, rated for 7.62×51Plates are made of AR500 SteelPlates are base coated for Spall ProtectionSide Plates are made for the G2 Green2 Tactical VestImages show vest and 10×12 plates for size reference. This listing is for 2 side plates onlyLevel 3, rated for 7.62×51Made for the G2 Vest. These will fit the Green2 Tactical Vest. View Photos for installing procedures.

AR500 Level 3 III Body Armor Plate – Curved Swimmer Cut 11 x 14
23 Jul 2026

AR500 Level 3 III Body Armor Plate – Curved Swimmer Cut 11 x 14

by | | 0

Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (1) AR500 Multi-Curved Body Armor Plate • Plate Sizes: 11″ x 14″ • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.

AR500 Level 3 III Body Armor Plates Pair – Curved 11×14 Swimmer Set
23 Jul 2026

AR500 Level 3 III Body Armor Plates Pair – Curved 11×14 Swimmer Set

by | | 0

Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. Description: • (2) AR500 Level III Multi-Curved Swimmer Cut Body Armor Plates • Plate Sizes: 11″ x 14″ • Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings** • Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.

AR500 Level 3 III Body Armor Plate – DRI Ergolite Triple-Curved Adv Swimmer Cut
23 Jul 2026

AR500 Level 3 III Body Armor Plate – DRI Ergolite Triple-Curved Adv Swimmer Cut

by | | 0

Down Range Industries specializes in making AR500 Body Armor and AR500 Steel Targets. We pride ourselves on making AMERICAN MADE products with AMERICAN MADE steel! We use a CNC laser to cut all of our steel. Our process allows for less heat affected zone (HAZ) and will ensure the Body Armor and Steel Targets have enhanced longevity and edge durability. This Down Range Industries AR500 Level III ErgoLite Triple-Curved Advanced Swimmers Cut was manufactured for people who love the Triple Curve design and an exaggerated cut for awesome ergonomics.This plate features two bends towards the bottom to hug aroundthe body, and another curve on top to wrap comfortably around the upper chest. This plate features awesome ergonomics and is 17% lighter than most SAPI cut designs, and10% lighter than our original Swimmer Cut design and comes in at around 6.9 lbs! Description: • (1) ONE AR500 Level III ErgoLite Triple-Curved Advanced Swimmers Cut • Plate Sizes: 10″ x 12″ • Triple-Curved to accommodate natural angle of body. • Fully encapsulated Line-X Paxcon base coat to protect against corrosion, sweat, etc. ***Line-X Paxcon is the industry leading MIL-SPEC polyurea that is used in a wide variety of military applications, including the Pentagon! Beware of other companies that are using run of the mill bed liner, ESPECIALLY when used in anti-spall and frag coatings**• Laser cut to ensure armor longevity and edge durability (see attached picture) • Tested to defeat 6 rounds from 7.62 x 51 (.308) @ 2780 fps (see 3rd party ballistic lab results) • Ability to be used in front and/or back. ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** Weights & Sizes: (These are only baseline numbers to get an idea of which size you need. Sizes depend on body type, shape, etc) Smaller Individuals (Approx Height of 5’0″ – 5’6″)8×10 Swimmer – 5.2 lbs8x10 SAPI – 5.6 lbs Medium Individuals (Approx Height of 5’7″ – 6′)10×12 ErgoLite Triple Curved Swimmer – 7.1 lbs 10×12 Swimmer – 7.7 lbs10x12 SAPI – 8.4 lbs Larger Individuals (Approx Height of 6’1″ or taller)11×14 Swimmer – 10 lbs11x14 SAPI – 10.5 lbs 6×6 Side Plates – 2.6 lbs/ea 6×8 Side Plates – 3.3 lbs/ea NO SHIPPING TO CONNECTICUT! By purchasing this item you agree to our terms and conditions stated below:Terms and Conditions – Legal and Terms of Use: By purchasing from Down Range Industries, LLC, you agree to be bound by these terms and conditions (“Terms &Conditions”); furthermore, you represent, warrant, and confirm the following: We do not ship to out of country, Connecticut, FPO/APO, or any US Protectorate. You are at least 18 years of age and the age of majority in your state, province, or territory of residence at the time of purchase; You are not legally barred from purchasing, possessing, or using the item(s) purchased; You are legally allowed to possess and use the item(s) in your state; Your purchase does not violate any local, state, or federal laws; You are not a felon; You are not purchasing the item(s) for criminal or amoral purposes; You will only use the item(s) purchased for lawful purposes; You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions; You assume all risk of use (or misuse) of the item(s) purchased; You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT, and if a bullet strikes you there is always a risk you will be injured or killed; and You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless Down Range Industries for any and all liability stemming from your purchase, possession, or use of the item(s). Illegally purchasing, possessing, or using body armor or other items sold by Down Range Industries may result in severe legal consequences for you, up to and including incarceration. Down Range Industries willfully cooperate with all criminal investigations. Non-law enforcement residents of Connecticut are prohibited from purchasing body armor. Down Range Industries assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including without limitation any incidental or consequential liability. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY DOWN RANGE INDUSTRIES. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. Down Range Industries specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold. Down Range Industries is not liable for any consequential damages, and its liability is limited to repairing or replacing defective items. Every item is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the buyer. In regards to our Spall Pad Covers: Spall pad covers are only meant to mitigate the amount of spall/fragmentation when shot. No spall blocker, spall cover or spall coating will mitigate 100% of spall/fragmentation. If a bullet strikes you there is always a risk you will be injured or killed. Buyer assumes all responsibility of the use and misuse of our spall mitigation products. These Terms & Conditions may be updated, revised, or changed without prior notice.