UHMW-PE ULTRALIGHT Full body Armor Set.Includes 2 single 5.56 magazine pouches.Protection Level: NIJ Level IIIA+Rated for:5.7x28mm 40 grain FMJ from 1 meter distance- point blank range5.7x28mm 40 grain “blue-tip” from 1 meter distance- point blank rangeDescription: A concealable low-profile, large coverage area quick-release pin equipped vest. WARMAG Part Number: W-FB016Size: One size- Medium/Large to X-Large Men’s Size (very large armor panels, lots of adjustment on all straps) Carrier Size: 38-46 in. adjustableFront Shell: 16 x 20 in. Front Insert: Size 15 x 18 in.Back Shell: 17 x 19 in.Back Insert Size: 17 x 18 in.Groin Shell: 10 x 13 in.Groin Insert: 9.5 x 11 in.Upper Torso Insert 6.25 x 11 in at widest point.Side Neck Inserts: 9 x 11.25 in.Shoulder Pad Shell: 14-18 in. adjustable. Shoulder Insert 9 x 11.25 in.Features: -Comes fully assembled and inspected by WARMAG LLC (Assembled in USA)Includes all ballistic level IIIA+ insert panels (10 UHMW-PE inserts total). -34 layers of UHMW-PE (area density 6.29kg/m) and 5.0mm foam built-in trauma pads.-2 pockets for up to 11×14 in. (front and back) hard rifle-rated plate inserts. (Hard armor plates are not included).-Can also be worn as a plate carrier without all of the extra armor pieces on. can be easilly added or removed-1 Strap with clip to attach rifle buttstock onto for hands-free activity. (optional and can be removed/detached)5 warranty on materials and craftsmanship. We do not cover damage due to normal wear and tear, abuse, improper storage, or neglect. WARMAG LLC LEGAL DISCLAIMERLegal Terms, Use, Liabilities, Disclaimer(s), Conditions and Warranty – These may be updated, revised, or changed without prior notice.By purchasing from WARMAG LLC, you agree to be bound by these terms and conditions on this whole document and all pages and compromising this whole web page(s) or printed tangible page(s) (“Terms & Conditions”); furthermore, you represent, warrant, agree and confirm the following:– Due to the serious nature of our products regarding aid in protection, we can only accept returns on body armor is in a new and unused condition, and returned within 30 days of purchase.– WARMAG LLC strives to produce the best possible products. You understand that NO products are 100% “bulletproof”, but rather, are bullet resistant. You understand that WARMAG LLC products may stop bullets or projectiles but still result in injury or death to the user due to impact, force, angle, mishap, defect or blunt force trauma. You agree to not hold WARMAG LLC liable for any death or injury while wearing our products.– Force Majeure is in effect with regards to all purchases– We do not sell to felons or minors and it is against the law for a felon to possess Body Armor under both federal law (unless required by your employer, see Sec.931) and is also illegal under state law in many states.– It is the SOLE responsibility of the purchaser to ensure that all transactions conform to U.S., Federal, State and Local Statutes, Codes and Ordinances.– We reserve the right to refuse to sell to anyone, in our sole discretion, at any time and you admit to understanding this and will not hold WARMAG LLC liable against any lawsuit whether in the form of discrimination or otherwise.– You are at least 18 years of age or at a minimum you are of the legal minimum age required in your state, province, or territory of residence at the time of purchase;– You are not a felon or legally barred from purchasing, possessing, or using the item(s) purchased;– You are legally allowed to possess and use the item(s) in your state and your purchase does not violate any local, state, or federal laws;– You are not purchasing the item(s) for criminal or amoral purposes and you will only use the item(s) purchased for lawful purposes;– You are purchasing the item(s) on your own behalf and not on behalf someone else in order to avoid complying with these Terms and Conditions;– You understand that illegally purchasing, possessing, or using body armor or other items sold by WARMAG LLC may result in severe legal consequences for you, up to and including incarceration. WARMAG LLC will fully cooperate with all criminal investigations.– You assume all risks of use (or misuse) of the item(s) purchased.– You agree that WARMAG LLC is not, will not and should not be liable for any actions taken after the sale by the purchaser or for any improper use or misuse of any product by you or someone who attains the product from or by you. YOU are responsible for the product you purchase or attain. WARMAG LLC assumes NO LIABILITY for your use or misuse of any item(s) sold or donated, including, without limitation, any incidental or consequential liability.– You understand that body armor is not bullet proof—IT IS ONLY BULLET RESISTANT when used properly, and if a bullet strikes you there is always a risk you will be injured or killed– You understand that at at some angles, it is possible for projectiles to slide or deflect off edges of our products or otherwise ricochet. Projectiles that are stopped by our products can always potentially produce some level of injury for example: bruising, fractured (broken) bones, serious internal injury, bleeding or even death.– You understand that no bullet resistant armor, plates, materials or otherwise products represented or sold by WARMAG LLC can guarantee you to be invulnerable to all threats. Getting shot ALWAYS CARRIES RISK and WARMAG LLC is not liable for such risk.– You agree not to test body armor by having a person(s) or animal(s) wear it and be shot with a firearm or pierced with a sharp object–any video submitted to us showing such behavior will not be promoted in any way, and, if posted publicly (e.g., YouTube), could be used against you in criminal prosecution; and– You agree, for yourself and your heirs, assigns, and agents, to fully and completely release, never bring any action in any court of law against, and to indemnify, defend, and hold harmless WARMAG LLC for any and all liability stemming from your purchase, possession, or use of the item(s).– You agree that venue for any arbitration, or any legal dispute shall lie in the city of Morganton, North Carolina, in the county of Burke only. The laws of the state of North Carolina apply to all transactions.– You understand that it is your responsibility to give a copy of these terms and conditions upon transfer or resale by you to another party and that WARMAG LLC will not be held liable for any matters involving that sale.Non-law enforcement residents of Connecticut are prohibited from purchasing body armor online. It is the Purchasers responsibility to follow regulations in the state you reside. WARMAG LLC will not be held liable for mistakes in law on your part.Manufacturer’s Warranty (WARMAG LLC, partner factories or manufacturers):– ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE HEREBY EXCLUDED. NO ORAL AGREEMENT OR WARRANTY OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY WARMAG LLC. Statements, images, or descriptions are informational only, and not made or given as a warranty in any way. WARMAG LLC specifically disavows any other representation, warranty, or liability related to the condition or use of the items sold.– Armor and/or armor plates are ONE TIME USE and must be replaced after being shot.– WARMAG LLC does offer free replacement for products that have been used for personal protection and sustain damage in-service or combat scenario for civilian personnel, provided there is video evidence (via action camera or other video-recording device) and the product is sent to WARMAG LLC for inspection. This offer does not apply where anyone engages in a malicious act against another or in any other illegal act.– WARMAG LLC will not guarantee any product if it not used for reason intended.– Ultralight (UHMW-PE) Armor products have a maximum temperature limit of 140F/60C and should not be exposed to temps above that. Exposure above the limits can cause materials to breakdown and potentially cause products to fail.– Do not leave products in direct sunlight.Replacement Guaranty:-Warranties vary and are item specific. – WARMAG LLC does not cover any consequential damages, unless specifically mentioned for specific products and is entirely at the discretion of WARMAG LLC to do so. We are committed to replacing defective items. Items that are damaged due to neglect or normal wear and tear do not fall under warranty coverage.– WARMAG LLC is willing to replace any armor plate or shield free of charge that has damage from a projectile impact while in-service by a Law Enforcement Officer (Police Officers/Ems/Fed only) or Federal Agent. WARMAG LLC will use the product for advertising or marketing purposes. WARMAG LLC will issue a replacement product equal to the returned product including a reasonable amount of shipping costs. WARMAG LLC requires photographs of the product, information regarding the shooting or incident and a case number or file number from the proper agency investigating the shooting.– WARMAG LLC will NOT accept any product return that has been improperly used in any manner other than explicitly described by WARMAG LLC.– WARMAG LLC will repair or replace any manufacturer defects with a WARMAG LLC product for 1 year after the date of manufacture (product specific), at WARMAG LLC’s discretion.– Purchasers agree that WARMAG LLC products should be handled with care and replacement does not include (but not limited to) the purchaser throwing around, mutilating or otherwise using in a ludicrous form or manner apart from the product’s purpose.Show respect for the product(s) and WARMAG LLC will stand behind our product(s). Any damage caused by the user is not covered by our warranty.International Traffic in Arms Regulations (ITAR) / Export Regulations)Level IV rifle rated body armor (Rifle Plates) and Bomb/Blast system fall under the jurisdiction of the International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the U.S. Government. Export or retransfer of Level IV Rifle Plates by any means to any foreign end user, or for any other end use, whether in the U.S. or abroad, without the written approval of the U.S. Department of State, is prohibited.Level III rifle rated plates are now under the control of the Commerce Department’s Bureau of Industry and Security (BIS) and administered under the Export Administration Regulations (EAR) and remain subject to the export controls laws of the U.S. Government. Export or retransfer of Level III Rifle Plates by any means to any foreign end user, or for any other end user, whether in the U.S, or abroad, without the written approval of the U.S. Department of Commerce, is prohibited.The sale, transfer, transportation, or shipment outside of the U.S. of any product prohibited or restricted for export without complying with U.S. export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. WARMAG LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.Misc. terms:– WARMAG LLC strives to test its products against multiple threats. It is not possible for WARMAG LLC to test against EVERY possible threat in all forms, weaponized or other.– Purchasers for resell are responsible for collecting sales tax, use or import taxes, fee’s, etc. as applicable. A tax exemption certificate will be required.– Returned checks are subject to a minimum fee of $30.– Shipping or delivery correction due to customer error will be charged at the rate of delivery company plus $15.– Any invoice, shipment of products or delivery of goods unpaid within 30 days from date of issuance are liable for a minimum charge of 2% monthly interest.– Shipments damaged or lost in transit must be communicated to WARMAG LLC within 2 business days from expected date of delivery to claim for damage or loss.Product Warranty Cont.WARMAG LLC unconditionally offers and provides a 5-year warranty on most products for Federal, State, Municipal and other qualified buyers when explicitly stated and when provided this document.WARMAG LLC ballistic products warranty does not cover intentional or unintentional misuse by the wearer/user/buyer.WARMAG LLC Terms and Conditions must be followed and adhered to all times and any use outside of the Terms and Conditions will void the warranty.WARMAG LLC labels will also explicitly state additional terms and Conditions which must be followed and adhered to at all times.Ballistic products should be treated as lifesaving tools and/or equipment and respected/treated with care at all times.**This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
